I'm excited to introduce our next guest blogger, Emily. You can find her over at The Boy Trifecta where it is all boy all the time. A great place for inspiration if you have boys! And don't forget to stop by and tell her HAPPY BIRTHDAY!!
Hi everyone! My name is Emily, and I blog about boy goodness over at The Boy Trifecta. I'm so excited to be sharing the Oversized Hoodie for Dress Your School Boy week!
I've found that, while there are some great boys patterns, many of the end at size 6 or 7, leaving my extremely tall 9-year-old out of the handmade fun. I also find that sewing for him can get pricey, because his garments require so much fabric! Many hoodie patterns are fully lined, designed to help the home sewist enclose raw fabric edges. This pattern is designed to conserve fabric by lining only the hood, while still being large enough for a big kid. I think this pattern is a comfortable size 12. Also, this is a QUICK project. I can get through this hoodie in less than 90 minutes. Let's get started! Materials: Oversized Hoodie Pattern Pieces 1.75 yards knit fabric .5 yards rib knit Separating zipper (30 inches) Twill tape (optional) Sewing machine Coordinating thread Zipper foot. *Note: You will notice that I sewed this entire project, except the zipper, on my serger. I did this because my regular machine is in the shop, so I didn't have another option. You can ABSOLUTELY sew this on a regular machine. I would suggest either a stretch stitch or a zig zag stitch for all seams, except the zipper. If you use a knit, you can leave the edges raw.
1. Cut your pattern pieces. I recommend printing all the pages, taping the pages together, and then cutting out the pattern pieces. The hoodie body is one pattern piece for both front and back. I suggest using the pattern piece to cut the hoodie back first, then trim out the neckline from the pattern piece and use the same piece for the front body pieces. Front and back necklines are marked on the pattern piece.
2. Cut your fabric. You should have one back body (use body piece and cut on fold), two front body pieces (use body piece, cut both pieces at once by laying pattern on fabric, wrong sides together), four hood pieces (cut two simultaneously by placing on fabric wrong sides together), and two sleeve pieces (use sleeve pattern pieces, cut on fold). Cut three pieces of rib knit. Two of the should be 9 inches wide by 6 inches tall, and the other should be 32 inches wide by 8 inches tall. Place them in a messy pile on your kitchen table. (I guess that last part is optional). :)
5. Sew up the side seams. Turn underneath the arm and sew the arm seam.
*Optional: Cover this seam at the back of the neck with twill tape. This is a common finishing method in unlined hoodies. 9. Grab your smaller piece of rib knit. Fold it in half, matching the short ends, and stitch up the side.
13. You're almost done! Now grab your zipper. Unfortunately, I don't have photos of this part because I had to sew in the zipper at the machine shop where my machine is being repaired, but don't be scared! It is SO EASY! Just separate the zipper. Lay it face down on the front of the hoodies. Either hand baste it in place, or pin well. Stich it down. The just turn the zip right side up, turning the edge of the zipper tape and raw fabric edge under. Topstitch in place. Repeat with the other side. And you're done!
Make your kid model their new fall hoodie in 90 degree heat. Riley actually really loves this hoodie, despite the look on his face. Andrea, thanks for having me!
Wow Emily! This is so impressive! Thank you SO much for this generous pattern! I'm sure there will be many boys modeling this in days to come!
Don't forget to join the Flickr group and check out the other Dress Your (School) Boy posts!